ENGINEERING ADHESIVES

Product Details:

Solid lubricant paste for bolted metal joints; Contains no lead or nickel.

Additional Information:

• Packaging Details: Suitable for bolted connections that are subjected to high temperatures up to 650¿¿C and to corrosive impacts, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-tensioning forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection molding machines, bolted connections in the chemical industry and also for the tension rings of centrifuges.

Product Details:

A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools. 

Key benefits:

• Multi-purpose durable repair composite
• Fully machinable using conventional tools
• Application and cure at room temperature - no hot work involved
• Simple mixing ratio
• Reduced health and safety risks as it is solvent-free
• No shrinkage, expansion or distortion
• Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
• Will adhere to many other natural and synthetic materials including glass and wood 
• Outstanding corrosion resistance
• Excellent chemical resistance against a wide range of chemicals
• Excellent electrical insulation characteristics

Applications for Belzona 1111 (Super Metal) include:

• Repair of cracks and holes on engine and pump casings, pipes, tanks and other equipment
• Resurface of pitted metal surfaces
• Repair of damaged shafts and hydraulic rams
• In-situ flange repair
• High strength structural adhesive for metal bonding
• Creation of irregular load bearing shims and reforming of bearing housings

Belzona 1111 (Super Metal) is suitable for contact with potable water as it is certified to NSF/ANSI Standard 61 and satisfies the UK Drinking Water Inspectorate requirements. 

Product Details:

Anabond-662 is a single component modified silicone system that readily wets as well as adheres to dry surfaces of metals ceramics rubbers plastics & all insulating materials giving them very high surface resistivity even under moisture condensing conditions. Anabond 662 does not harden or dry out or melt even after 1000 hours at 200 deg C. It shows good dielectric & lubricating properties.